|
Babel Buster IP/XL is
a BACnet IP slave (server) device that functions as a LonWorks device
manager. A large number of BACnet objects gives you flexibility in
mapping LonWorks Network Variables to any combination of BACnet
objects. NV Structures may be parsed to multiple BACnet objects when
reading. Multiple BACnet objects may be packed into a single structured
variable when writing. All standard SNVT’s are supported.
Objects
mapped to Network Variable Outputs (NVO) will poll their assigned
variable at the interval you specify. Network Variable Inputs (NVI) are
written each time the mapped BACnet object is written. BACnet input
objects correspond to NVO’s on the LonWorks device. BACnet output
objects correspond to NVI’s on the LonWorks device. BACnet value
objects may be mapped to NVI’s for writing without priorities.
Configuration
of the IP/XL is done via the embedded web interface. You can upload an
XIF file to define the LonWorks device, or in many cases, import the
file from the device itself.
• Universal, fully configurable
• No extra software or drivers to buy
• Read/Write any standard LonWorks SNVT via BACnet
• 300 Input objects each of types AI, BI, MSI
• 100 Output objects each of types AO, BO, MSO
• 100 Value objects each of types AV, BV, MSV
• BACnet slave polls unbound LonWorks network variables
• Bidirectional communication between BACnet & LonWorks
• Manages NV structures as multiple BACnet objects
• Maps up to 1000 network variables (total, all devices)
• Manages up to 50 LonWorks devices
• Commandable BACnet objects implement priority array
• TP/FT-10A transceiver for LonWorks
• Supports Neuron based nodes (host based excluded)
• 10/100BaseT Ethernet for BACnet IP
• Powered by 10-30VDC or 12-24VAC 50/60 Hz
• Power Consumption: 0.1A @ 24VDC
• DIN rail mounting, 100mm H x 70mm W x 60mm D
• Pluggable screw terminal block for power & RTU network
• Operating temperature -40°C to +85°C
• Humidity 5% to 90%
• FCC Class A, CE Mark |
